ug30apt-e3, ug30bpt-e3, ug30cpt-e3, UG30DPT-E3 www.vishay.com vishay general semiconductor revision: 24-feb-16 1 document number: 88762 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual common cathode ultrafast plastic rectifier features ? power pack ? glass passivated pellet chip junction ? ultrafast recovery time ? low switching losses, high efficiency ? low forward voltage drop ? high forward surge capability ? solder dip 275 c max., 10 s per jesd 22-b106 ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in high frequency rect ifier of switching mode power supplies, inverters, freewheel ing diodes, dc/dc converters, and other power swit ching application. mechanical data case: to-247ad (to-3p) molding compound meets ul 94v-0 flammab ility rating base p/n-e3 - rohs-compliant, commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 ? e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs max. primary characteristics i f(av) 30 a v rrm 50 v, 100 v, 150 v, 200 v i fsm 300 a t rr 25 ns v f at i f 0.85 v t j max. 150 c package to-247ad (to-3p) diode variation common cathode 1 2 3 pin 1 pin 3 case pin 2 to-247ad (to-3p) electrical characteristics (t a = 25 c unless otherwise noted) parameter symbol ug30apt ug30bpt ug30cpt ug30dpt unit max. repetitive peak reverse voltage v rrm 50 100 150 200 v max. rms voltage v rms 35 70 105 140 v max. dc blocking voltage v dc 50 100 150 200 v max. average forward rectified current at t c = 120 c i f(av) 30 a peak forward surge current 8. 3 ms single ha lf sine-wave superimposed on ra ted load per diode i fsm 300 a operating and storage temperature range t j , t stg -65 to +150 c
ug30apt-e3, ug30bpt-e3, ug30cpt-e3, UG30DPT-E3 www.vishay.com vishay general semiconductor revision: 24-feb-16 2 document number: 88762 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) thermal resistance from junction to case per diode mounted on heatsink electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbo l ug30apt ug30bpt ug30cpt ug30dpt unit max. instantaneous forward voltage per diode 15 a t j = 100 c v f 1.0 v 30 a 1.15 10 a 0.85 max. dc reverse current at rated dc blocking voltage per diode t a = 25 c i r 15 a t a = 100 c 800 max. reverse recovery time i f = 0.5 a, i r = 1.0 a, ? i rr = 0.25 a t rr 25 ns max. reverse recovery time i f = 15 a, v r = 30 v, ? di/dt = 50 a/s, ? i rr = 10 % i rm t j = 25 c t rr 35 ns t j = 100 c 50 max. recovered stored charge i f = 15 a, v r = 30 v, ? di/dt = 50 a/s, ? i rr = 10 % i rm t j = 25 c q rr 22 nc t j = 100 c 50 typical junction capacitance 4.0 v, 1 mhz c j 70 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol ug30apt ug30bpt ug30cpt ug30dpt unit typical thermal resistance per diode (1) r ? jc 2.0 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-247ad UG30DPT-E3/45 6.15 30 30/tube tube
ug30apt-e3, ug30bpt-e3, ug30cpt-e3, UG30DPT-E3 www.vishay.com vishay general semiconductor revision: 24-feb-16 3 document number: 88762 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - max. forward current derating curve fig. 2 - max. non-repe titive peak forward surge current per diode fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse leakage characteristics per diode fig. 5 - reverse switching characteristics per diode fig. 6 - typical junction capacitance per diode ? 0 25 50 75 100 125 150 175 0 6 12 18 24 30 36 average forward rectified current (a) case temperature (c) resistive or inductive load 1 10 100 10 100 1000 n umber of cycles at 60 hz peak forward surge current (a) t c = 120 c 8.3 ms single half sine-wave 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 100 instantaneous forward voltage (v) instantaneous forward current (a) t j = 25 c pulse width = 300 s 1 % duty cycle 0 20 40 60 80 100 0.01 0.1 1 10 100 1000 percent of rated peak reverse voltage (%) instantaneous reverse leakage current (a) t j = 100 c t j = 25 c 0 25 50 75 100 125 150 175 0 10 20 30 40 50 60 junction temperature (c) i f = 15 a v r = 30 v di/dt = 100 a/s di/dt = 50 a/s di/dt = 100 a/s di/dt = 150 a/s di/dt = 50 a/s di/dt = 20 a/s di/dt = 150 a/s di/dt = 20 a/s recovered store change/reverse recovery time (nc/ns) 0.1 1 10 100 1 10 100 reverse voltage (v) junction capacitance (pf) t j = 125 c f = 1.0 mhz v sig = 50 mvp-p
ug30apt-e3, ug30bpt-e3, ug30cpt-e3, UG30DPT-E3 www.vishay.com vishay general semiconductor revision: 24-feb-16 4 document number: 88762 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) pi n 1 pi n 3 case pi n 2 to-247ad (to-3p) 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.142 (3.6) 0.138 (3.5) 0.170 (4.3) 0.086 (2.18) 0.076 (1.93) 0.160 (4.1) 0.140 (3.5) 0.225 (5.7) 0.205 (5.2) 0.127 (3.22) 0.117 (2.97) 0.048 (1.22) 0.044 (1.12) 0.795 (20.2) 0.775 (19.6) 0.840 (21.3) 0.820 (20.8) 1 2 3 0.078 (1.98) ref. 0.203 (5.16) 0.193 (4.90) 10 typ. both sides 30 10 1 ref. both sides 0.030 (0.76) 0.020 (0.51) 0.118 (3.0) 0.108 (2.7)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
